MIDA EVSE 8A 10A 16A Mode 2 Type 2 EV Charger Box Car Charger
| Rated Current | 8A / 10A / 13A / 16A ( Optional ) | ||||
| Rated Power | Max 3.6KW | ||||
| Operation Voltage | AC 110V~250 V | ||||
| Rate Frequency | 50Hz/60Hz | ||||
| Leakage Protection | Type B RCD ( Optional ) | ||||
| Withstand Voltage | 2000V | ||||
| Contact Resistance | 0.5mΩ Max | ||||
| Terminal Temperature Rise | ＜50K | ||||
| Shell Material | ABS and PC Flame Retardant Grade UL94 V-0 | ||||
| Mechanical Life | No-Load Plug In / Pull Out ＞10000 Times | ||||
| Operating Temperature | -25°C ~ +55°C | ||||
| Storage Temperature | -40°C ~ +80°C | ||||
| Protection Degree | IP67 | ||||
| EV Control Box Size | 200mm (L) X 93mm (W) X 51.5mm (H) | ||||
| Weight | 2.2KG | ||||
| OLED Display | Temperature, Charging Time, Actual Current, Actual Voltage, Actual Power, Capacity Charged, Preset Time | ||||
| Standard | IEC 62752 , IEC 61851 | ||||
| Certification | TUV,CE Approved | ||||
| Protection | 1.Over and under frequency protection 2. Over Current Protection 3.Leakage Current Protection (restart recover） 4. Over Temperature Protection 5.Overload protection (self-checking recover) 6. Ground Protection and Short circuit protection 7.Over voltage and under-voltage protection 8. Lighting Protection |
||||
1.Conform to the provisions and requirements of IEC 62752 , IEC 61851
2.High compatibility. It can charge all EVs with Type 2 inlets, correctly and effectively
3.Easy operation. Simply connect the plug with the EV’s inlet, and switchable currents. Customers can choose an appropriate charging current according to the demand.
4.High security. It has passed all tests of TUV. There are all kinds of protective measures to ensure the safety for every user
5. We are a factory providing OEM/ODM services
PRODUCT CARE
- Ensure your charge cable is protected against water and damp to ensure the long life of your cable.
- Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.
- Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.
- Dust caps should always be replaced when cable is not in use.
- It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.
Do not drive over your cable or plugs or continually drop the plugs.
Leave Your Message:
Write your message here and send it to us
